FAQs
Frequently asked questions
Record
Begin with a freshly NTFS-formatted USB storage device you have obtained from GRIDSMART or with a Data Stick or Drive that you have already used ...
Fri, 14 Jul, 2017 at 10:15 AM
Normally no. The system acquires video from camera intersections, and uses that video for detection and counting. While the vehicle statistics of the inters...
Wed, 18 Oct, 2017 at 4:28 PM
Enter the IP address of the remote site into the search box in the upper right of the Sites Homepage. You should be able to skip this step if you have pre...
Thu, 20 Sep, 2018 at 12:13 PM
Publishing changes of any of the following types will necessitate an Engine and learning restart.
Adding or removing camera(s).
The very first publish,...
Wed, 30 Aug, 2017 at 2:02 PM
The camera internal frame rate is between 15 and 30 frames per second. GRIDSMART uses images from the camera between 5 and 10 frames per second.
Fri, 14 Jul, 2017 at 10:19 AM
This document describes how GRIDSMART computes and reports speed data as of GRIDSMART 6.4 (November 2016). GRIDSMART computes normalized speeds without ...
Wed, 19 Jul, 2017 at 1:48 PM
Follow this simple Recommission procedure if you need to replace a non-functional GRIDSMART Processor. You will need the most recent configuration – i.e., t...
Fri, 14 Jul, 2017 at 10:53 AM
Begin with a freshly NTFS-formatted USB storage device or with a Data Stick or Drive that you have already used with GRIDSMART. If you are formatting a ne...
Mon, 17 Sep, 2018 at 2:29 PM
Click Configure (the pencil icon) on the Site Menu to enter the Site Configuration Screen and then click Revert.
Select the desired previously publis...
Fri, 14 Jul, 2017 at 8:39 AM
Power down the GRIDSMART Processor and replace the installed Option Card with one that matches the new Traffic Cabinet
Power up the processor, launch...
Fri, 14 Jul, 2017 at 10:58 AM