Terminology

Local Site or Local Processor
The Local Site or Local Processor refers to a GRIDSMART Processor to which you are connected via the local port on the Processor. The site on the Processor i...
Fri, 14 Jul, 2017 at 1:36 PM
Max Recall
Option that can be set for a Vehicle Zone. When Max Recall is On, all configured outputs for the zone will be set to Active in Learning Mode and during any f...
Fri, 14 Jul, 2017 at 1:37 PM
Modules
Modules are independently licensed sets of features that can be enabled on a GRIDSMART Processor. With 6.0, available modules include the Performance Module...
Fri, 14 Jul, 2017 at 1:37 PM
Object Mask
Object Masks should be drawn to cover objects that block or interfere with the camera view of the ground or road. Object Masks are important to eliminate obj...
Fri, 14 Jul, 2017 at 1:39 PM
Option Card
The Option Card is the IO module on the front of a GS2 that is used to connect the Processor to the Traffic Cabinet
Fri, 14 Jul, 2017 at 1:41 PM
Pedestrian Module
The Pedestrian Module enables the GRIDSMART system to detect pedestrian moving through crosswalks for extensions and increased safety. Note that the Pedestr...
Fri, 14 Jul, 2017 at 1:42 PM
Pedestrian Zone
A Pedestrian Zone is the basic Pedestrian detection region. You usually assign an output to this so that a signal is sent to the controller when a Pedestrian...
Fri, 14 Jul, 2017 at 1:43 PM
Performance Module
The Performance Module, introduced with GRIDSMART 6.0, includes all the functionality of the previous Counts and Realtime Data Modules. It additionally enabl...
Fri, 14 Jul, 2017 at 1:44 PM
Publish
Publishing means putting the changes you have made in the GRIDSMART Client into operation on the corresponding GRIDSMART Processor. Publish is available in t...
Fri, 14 Jul, 2017 at 1:57 PM
Publish History
The Publish History is visible in the Site Info panel by clicking Info on the Site View Screen. The Publish History shows a list of all changes that have eve...
Fri, 14 Jul, 2017 at 1:59 PM