Frequently asked questions

How to Record and review images and/or performance data
Record Begin with a freshly NTFS-formatted USB storage device you have obtained from GRIDSMART or with a Data Stick or Drive that you have already used ...
Fri, 14 Jul, 2017 at 10:15 AM
Does the GRIDSMART System store video?
Normally no. The system acquires video from camera intersections, and uses that video for detection and counting. While the vehicle statistics of the inters...
Wed, 18 Oct, 2017 at 4:28 PM
How to View a remote site with GRIDSMART Client
Enter the IP address of the remote site into the search box in the upper right of the Sites Homepage. You should be able to skip this step if you have pre...
Thu, 20 Sep, 2018 at 12:13 PM
What Publishes can make the Engine and learning restart?
Publishing changes of any of the following types will necessitate an Engine and learning restart. Adding or removing camera(s). The very first publish,...
Wed, 30 Aug, 2017 at 2:02 PM
What Camera frame rate does the GRIDSMART System use?
The camera internal frame rate is between 15 and 30 frames per second.  GRIDSMART uses images from the camera between 5 and 10 frames per second.
Fri, 14 Jul, 2017 at 10:19 AM
How does GRIDSMART work with speed data?
This document describes how GRIDSMART computes and reports speed data as of GRIDSMART 6.4 (November 2016). GRIDSMART computes normalized speeds without ...
Wed, 19 Jul, 2017 at 1:48 PM
How to Replace a GRIDSMART Processor (Recommission)
Follow this simple Recommission procedure if you need to replace a non-functional GRIDSMART Processor. You will need the most recent configuration – i.e., t...
Fri, 14 Jul, 2017 at 10:53 AM
How to get count data with a USB storage device
Begin with a freshly NTFS-formatted USB storage device or with a Data Stick or Drive that you have already used with GRIDSMART. If you are formatting a ne...
Mon, 17 Sep, 2018 at 2:29 PM
How to Revert a site to a previous configuration
Click Configure (the pencil icon) on the Site Menu to enter the Site Configuration Screen and then click Revert. Select the desired previously publis...
Fri, 14 Jul, 2017 at 8:39 AM
How to Change the Option Card on a configured GS2 for a different cabinet type
Power down the GRIDSMART Processor and replace the installed Option Card with one that matches the new Traffic Cabinet Power up the processor, launch...
Fri, 14 Jul, 2017 at 10:58 AM